Power States; Enabling Auto Power; Standby / Power On/Off - R&S TSMA6B-BP Manual

®
R&S TSMA6B-BP
6.3

Power states

6.3.1

Enabling auto power

Start the output of DC power at the docking connector and AUX1 / AUX2 by doing
one of the following.
● Insert fully charged batteries in the empty battery bays while no external DC
power supply is connected.
● Connect an external DC power supply while the battery bays are empty.
6.3.2

Standby / power On/Off

To switch to standby in host-controlled mode (R&S TSMA6/6B connected)
► Press the power off button of the R&S TSMA6/6B.
The R&S TSMA6B-BP is in standby mode
In standby mode, the output voltages on the R&S TSMA6/6B connector and the
AUX connectors are switched off. Only the standby voltage for the
R&S TSMA6/6B is provided.
In standalone mode, there is no possibility to power off the output voltages of the
R&S TSMA6B-BP.
To power on the R&S TSMA6B-BP from standby (R&S TSMA6/6B connec-
ted)
► R&S TSMA6/6B connected:
Press the power button the R&S TSMA6/6B.
To power on the R&S TSMA6B-BP from standby (R&S TSMA6/6B removed)
► Disconnect the DC input power and the batteries for a short time and connect
them again.
Manual 4900.9099.02 ─ 02
Operating the battery pack
Power states
21