Preparing For Use; Unpacking And Setting Up The Instrument - R&S TSMA6-BP Getting Started

®
R&S TSMA6-BP
4

Preparing for Use

Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric
shock, fire, personal injury, or damage.
● Do not open the instrument casing.
● Read and observe the "Basic Safety Instructions" delivered as a printed
brochure with the instrument.
In addition, read and observe the safety instructions in the following sec-
tions. Notice that the data sheet may specify additional operating condi-
tions.
Risk of instrument damage during operation
An unsuitable operating site or test setup can cause damage to the instru-
ment and to connected devices. Ensure the following operating conditions
before you switch on the instrument:
● The instrument is dry and shows no sign of condensation.
● The instrument is positioned as described in the following sections.
● Signal levels at the input connectors are all within the specified ranges.
4.1

Unpacking and Setting Up the Instrument

The following section describes how to setup the instrument.
Getting Started 4900.9030.02 ─ 03
Unpacking and Setting Up the Instrument
Preparing for Use
8