Preparing For Use; Unpacking And Setting Up The Instrument - R&S TSMA-BP Getting Started

®
R&S TSMA-BP
4

Preparing for Use

Risk of injury due to disregarding safety information
Observe the information on appropriate operating conditions provided in the
data sheet to prevent personal injury or damage to the instrument. Read
and observe the basic safety instructions provided with the instrument, in
addition to the safety instructions in the following sections. In particular:
● Do not open the instrument casing.
Risk of instrument damage during operation
An unsuitable operating site or test setup can cause damage to the instru-
ment and to connected devices. Ensure the following operating conditions
before you switch on the instrument:
● The instrument is dry and shows no sign of condensation.
● The instrument is positioned as described in the following sections.
● Signal levels at the input connectors are all within the specified ranges.
4.1

Unpacking and Setting Up the Instrument

The following section describes how to set up the instrument.
Risk of instrument damage
Note that the general safety instructions also contain information on operat-
ing conditions that prevent damage to the instrument. The instrument's data
sheet can contain additional operating conditions.
Getting Started 1177.5885.02 ─ 05
Unpacking and Setting Up the Instrument
Preparing for Use
9