Connecting R&S Tsma6/6B With R&S Tsma6B-Bp-Bp - R&S TSMA6B-BP Manual

®
R&S TSMA6B-BP
5 Connecting R&S TSMA6/6B with
R&S TSMA6B-BP-BP
Before initial operation, the batteries must be fully charged without an
R&S TSMA6B-BP connected.
To connect the R&S TSMA6/6B with the R&S TSMA6B-BP, the following steps
must be performed.
To connect a battery pack
1. Remove the cover cap from the docking connector of the R&S TSMA6/6B.
2. Screw the collar screws on the top of the R&S TSMA6B-BP with a Torx 8
screw driver.
● Torque: 0.66 Nm ± 0.05 Nm
Manual 4900.9099.02 ─ 02
Connecting R&S TSMA6/6B with R&S TSMA6B-BP-BP
17