R&S TSMA6B-BP Manual page 15

®
R&S TSMA6B-BP
1 = Battery bay 1 / 2
2 = DC Output Aux 1 / Aux 2
3 = Status LED for battery 1
4 = Status LED for battery 2
5 = DC IN connector
6 = DC Output / Control R&S TSMA6/6B (docking connector)
Battery bay 1 / 2
Use the batteries delivered with the product. See also
removing the batteries",
on page 26.
DC Output Aux 1 / Aux 2
Aux 1 / Aux 2 are used as DC output.
● U
(battery mode): 14 V to 16.5 V
out
● U
(DC powered): 18.5 V
out
Max. output current is 2 A per port.
With the power cables R&S TSMA6-BP1T and R&S TSMA6-BP2T (not part of the
standard accessory), up to four R&S TSMx (TSME6, TSMExxDC) devices can be
connected.
You find the connection description in the product user manuals.
Status LEDs for battery 1 and 2
For details about the status LEDs, see
alone operation",
DC IN connector
The DC IN connector is used to supply the R&S TSMA6B-BP with DC power. A
wide DC input range 11 V to 28 V is supported. Max. input current is 12 A.
See also Chapter 3.2, "Connecting to
DC Output / Control R&S TSMA6/6B (docking connector)
The docking connector is used for the power connection of a R&S TSMA6/6B
device and offers a I2C/SMBus interface for power management, charge control
and LED control.
Manual 4900.9099.02 ─ 02
on page 12 and
on page 23.
Chapter 3.3, "Inserting and
Chapter 8.2, "Handling
Chapter 6.4.2, "Rear panel LEDs in stand-
power", on page 10.
Instrument tour
Rear panel view
batteries",
15