Hot Swapping Battery Exchange - R&S TSMA6B-BP Manual

®
R&S TSMA6B-BP
8.2.2

Hot swapping battery exchange

When the battery charge reaches a low level, the batteries need to be replaced.
Replacement can be done through hot swapping without interrupting the mea-
surement on the connected devices.
1. Press one battery bay lid and open it up.
Figure 8-1: Open battery cover
2. Remove the battery by the tab.
3. Insert the batterie(s) in the correct way (charge indicator facing up). Take care
of the nut in the battery and the pin inside the battery bay.
Figure 8-2: Battery orientation
4. Close the lid(s) until it clicks into place.
Manual 4900.9099.02 ─ 02
Maintenance, storage and disposal
Handling batteries
29