TEC MA-1595-1 Series Owner's Manual page 179

6. PROGRAMMING OPERATIONS
Address No.
(10) REMARKS:
1) When the Head-link PLU is entered in a sale, the Sub-link PLU will automatically be
2) The PLU-to-PLU linkage is effective even when the Head-link PLU is an open-price
3) The linkage of the Sub-link PLU is as shown below.
4) It is possible to set multiple PLUs as Head-link to one Sub-link PLU. (In Example 1
5) Repeat, Item Correct, Dollar Discount, Vendor Coupon, Bottle Return, %+, or %-
6) The Sub-link PLU may be operated for sales entries, skipping the Head-link PLU,
7) Multiplication is possible on the Head-link PLU, and then the Sub-link PLU will
8) Modifier Keys (such as [SI/M]) will be effective for the Head-link PLU item only, and the
9) When an error occurs at the Sub-link PLU, only the Head-link PLU is entered but not the
10) When the Sub-link is a negative PLU, a Return Merchandise or Void entry through the
11) None of Scale-Compulsory PLUs should be linked as Sub-link to another PLU of Head-
12) When a price-change entry is made (using the [PR OPEN] or [OPEN] key) through the
13) PLU with the Age Limit Status or with the Quantity Entry Compulsion Status
Tare Table No. (for Scale-compulsory PLUs only)
11
Enter the Tare Table No. (1 to 9). The content of each Tare Table is set later in a separate
operation (Submode 26). In a scale item entry of a PLU with a Tare Table No. set, the tare
weight preset in the Tare Table will automatically be subtracted from the total weight read
from the scale. Enter 0 to cancel a Tare Table No. once set. Or skip this address setting for
PLUs not needing any tare weight calculations.
PLU TABLE PROGRAMMING CONTENTS (continued)
Description of Programming Contents
entered. When the Sub-link PLU is an open-price PLU, the price entry and the [AMT]
key depression should follow manually on the main keyboard. This manual operation
sequence cannot be replaced by a PLU Preset-code Key on the main keyboard or on
the PK-2 keyboard.
PLU.
• Head-link PLU (one PLU) + Sub-link PLU (Max. seven PLUs)
The linkage of the Sub-link PLU is effective so that up to seven Sub-link PLUs can be
entered. If eight or more Sub-link PLUs are programmed, they will be ignored at the
item entry.
described above, it may be extended to have more Head-link PLUs of similar items such
as Drink Large, which also link to the Bottle Deposit of the same amount.)
operations are not accepted for PLU-to-PLU link entries. But Return Merchandise or
Void operation is possible for the Head-link (and the Sub-link PLU will be processed as
returned or voided item automatically, in this case).
without affecting the Head-link PLU sales memory.
automatically be multiplied with the same quantity.
modification will be disregarded for the Sub-link PLU.
Sub-link PLU. (Errors such as Multiplication Product Over-limit Error, the Sub-link PLU
has not been opened, the sale subtotal will turn into negative, etc.)
Head-link PLU is not possible.
link. An error will result on the Head-link item entry attempt in this case.
Head-link PLU, the Sub-link PLU will always require a manual amount entry (through
[AMT]) even when the Sub-link is a preset-price PLU.
programmed cannot be used for Link-PLU.
[#]
6-26
6.7 PLU Table Programming (Submode 4)
EO1-11152