TEC MA-1595-1 Series Owner's Manual page 168

6. PROGRAMMING OPERATIONS
Address No.
(1) NOTE: The "Major Group" and "Minor Group" here are merely namings for those two
Major-Minor Grouping Method Example:
(In this case, you should check the logical linkage between the Major Groups and Minor
Groups.)
"A" Grouping and "B" Grouping Method Example:
(In this case, you may think that each department data are processed into max. 2 different
types of groupings.)
2 Department Name (Descriptor)
Enter a maximum of 16 regular-sized or 8 double-sized characters by referring Section 6.2
Character Entries, then end with the [ST] key.
When no name is programmed for a department, the following will be the auto-program name
(default value) for printing:
3 Preset Price
• For a preset department (preset-price department), enter a maximum of 6-digit price, and
depress the [#] key.
When the option "Preset Point for one decimal digit allowed" is selected, the decimal digit
can be entered after entering a maximum of 5 integer digits and [.] key.
• A zero-price (0.00) may be preset by entering 0 in the above operation.
• When no numerics are entered and the [#] key is simply depressed, the department will be
an open department (open-price department).
• For a department handling gasoline, set the preset price per gallon
(max. 999.999 = 999 dollars 99.9 cents can be preset).
Be certain to enter the amount less than cent when programming the preset price of
gasoline.
ex.) To set the preset price of $1.25, enter the numeric value of 1250 and depress the [#]
DEPARTMENT TABLE PROGRAMMING CONTENTS (continued)
Description of Programming Contents
grouping total memories. In the memory process, those two totals are independent
from the other and no logical check is made for a combination of the Major and Minor
group codes to be linked to each department. In other words, you may regard them
as "A" grouping and "B" grouping. See the examples below:
Major GP 01
Minor Minor
GP 01 GP 02
DP01 DP02 DP04
0101 0101 0102
Linked Group Code in setting
A-GP A-GP
01 02
DP01 DP02 DP04
0100 0100 0201
Linked Group Code in setting
D P
1 to 999999 (result: 0.01 to 9999.99)
1 to 99999 (result: 0.01 to 999.99)
or
0.1 to 99999.9 (result: 0.001 to 999.999)
key.
Minor
GP 03
DP06 DP07 DP10
0103 0103
A-GP B-GP
03 01
DP06 DP07 DP10
0301 0300 0302
xx
Department Code 01 to 99
Double-sized characters
6-15
6.6 PLU Table Programming (Submode 4)
Major GP 02
Minor Minor
GP 04 GP 05
DP11 DP14
0204 0204 0205
B-GP B-GP
02 03
DP11 DP14
0002 0003
EO1-11152
DP16
0205
DP16 DP17
0003 0002