4. PROGRAMMING OPERATIONS
4.9
Department Table Programming
For each department, memory opening, and department various statuses settings are performed here.
To change the positive/negative status:
CONDITION
To change any other programmed data or to newly program departments:
OPERATION
Mode Lock: SET
1)
Menu Tree
2)
Operation Flowchart
After Department and PLU Daily and GT Resets
Any time outside a sale
"1 DP" is selected.
"1 DP SETTING" is
Select a department
to be programmed.
Input a Group No.
Input a preset price.
(A) (B)
-- continued on the next page --
Main Menu
ECR is being outside a sale and in SET mode.
"3 DP/PLU" is
Depress [↓] twice then [Enter].
selected.
Or Depress [3].
Depress [1] or [Enter] key.
Depress [1] or [Enter] key.
selected.
Select a department to be programmed with the
[↑] or [↓] key.
The ECR enters detailed setting mode for
[Enter]
department.
Department Group No. Setting (See *1.)
(01 to15)
[Enter]
The Group No. is entered and displayed.
Preset Price Setting (See *2.)
[Enter]
The preset price is entered and displayed.
(C)
4-24
EO1-11155
4.9 Department Table Programming