Multiple Alarms - Omron S8VS-01505 Manual

Peak Hold Current Reset
The peak value of the output current (i.e., the peak hold current) can
be reset on the display.
Operation mode
Reset
Peak hold current
value measurement
starts
Note: The peak hold current value is not reset in the setting mode.
Undervoltage Alarm Indication
This indicator lights when the output voltage lowers.
Operation
Mode
Undervoltage
alarm
Output
current
Peak-hold
current
Maintenance
forecast
monitor
Note: 1. When the voltage is restored to the set value or higher and
Key is pressed at the a01 display to return to the
the
output current display, the a01 alarm will be cleared and the
normal output display will return.
2. The above displays are for models with a maintenance
forecast monitor (S8VS-@@@24A@@).
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
Key Press 3 seconds or more.
2 seconds (Peak hold current will be displayed
2 seconds after it is reset.)
Undervoltage occurs.
*
Output voltage lower limit
*This indicator alternately
displays alarm (
the output voltage lower
limit.

Multiple Alarms

When two or more different alarms occur at the same time
Operation
Mode
Undervoltage
alarm
Maintenance
forecast
monitor
* When undervoltage alarm is indicated: Press
load indication
When the maintenance forecast monitor or overheat alarm is
indicated: Press
Note: 1. The above displays are for models with a maintenance
forecast monitor (S8VS-@@@24A@@).
) and
The indication shifts
(See note.)
alternately in the direction
of the arrow every 2 s.
(See note.)
Key → output
Key → undervoltage alarm indication
S8VS
27