Page 12
(15–36kg) Ⅱ Ⅲ trillo booster Instruction Manual This booster is approved to CNS 11497 and UN ECE regulation 44, 04 series of amendments. Please read all the instructions in this manual before installing and using the product.
Page 13
Contents Welcome to Joie Congratulations on becoming part of the Joie family! We are so excited Reference Figures 1 - 8 to be part of your journey with your little one. While traveling with the Joie TRILLO™ booster you are using a high quality, fully certified safety English Ⅱ/ Ⅲ...
DO NOT use another manufacturers soft goods NEVER use a booster seat if it has damaged or with this booster seat. See your retailer for Joie missing parts. DO NOT use a cut, frayed or dam- replacement parts only.
Consult the retailer for issues concerning mainte- Weight and Height Limits nance, repair and part replacement. To use this Joie booster seat, your child must meet all of the DO NOT use this booster as a regular chair as it following requirements.
Parts List 3. This booster has been classified as ‘Universal’ under more stringent conditions than those which applied to earlier designs which do not carry this notice. Fig. 1.1 Head Support Fig. 1.7 Shoulder Belt Fig. 1.2 Lower Back Support Positioning Clip 4.
Booster Assembly Assemble Side Impact Shield 1. Align the side impact shield with the slot of lower back Assemble Head Support support plastics mounts, and then insert to lock. (Fig.11) 1. Booster taken from the carton as Fig.6 2. Press side impact shield locking button (Fig.12),a click sound means the side impact shield is close completely.
Installation with 3-point-belt Have your child sit in a booster seat with their back flat against back of a booster seat. With back support NOT as shown in Fig. 20. Fasten buckle and pull up on the shoulder belt to tighten. 1.
Without back support The shoulder belt positioning clip must through the vertical bar of the base farthest from where the vehicle 1. Adjust backrest to flat position, then one hand to detach shoulder belt lays across the child. (Fig.31) backrest as Fig.25 to use base assembly independently.
Care and Maintenance Note Please wash the soft goods and inner padding with cold water under 30°C. Do not iron the soft goods. Do not bleach or dry clean the soft goods. Do not use undiluted neutral detergent, gasoline or other organic solvent to wash the booster.
Page 21
Share the joy at joiebaby.com J K0 0 7 _ C 111 8$ N...
Need help?
Do you have a question about the TRILLO C1118C and is the answer not in the manual?
Questions and answers