Operating Instructions - NewAir NKR058MB00 Owner's Manual

EN

OPERATING INSTRUCTIONS

The kegerator should be placed in an area where the ambient temperature is
between 32-100 degrees Fahrenheit. If the ambient temperature is above or
below this range, the performance of the unit may be affected. For example,
placing your unit in extreme cold or hot conditions may cause the interior
temperatures to fluctuate.
When you first plug in your Newair Kegerator, the LED display will show the
"live" cabinet temperature in Fahrenheit and the thermostat will be set to 41
degrees Fahrenheit (5 degrees Celsius). The operating panel includes several
other features to operate and control the temperature of the kegerator:
Press either button once and release to enter the SET mode; the LED
display will begin to flash and show the previous temperature setting, signifying
that the temperature is ready to be adjusted
Each press of either button will increase or decrease the temperature
incrementally by one degree Fahrenheit or Celsius until the desired
temperature is reached, between 32-75 degrees Fahrenheit (0-24 degrees
Celsius) NOTE: After a button is pressed, the display will flash for 5 seconds
before returning to displaying the internal temperature of the cabinet
Press the button to alternate the display between Fahrenheit and Celsius;
the corresponding pilot light adjacent to the selector will illuminate to signify
which temperature mode has been selected for display
If you are going on vacation, you may leave the kegerator operating during
vacations of less than three weeks. If the appliance will not be used for several
months, you should remove all items and turn off the appliance. Clean and dry
the interior thoroughly. To prevent mold growth, leave the door open slightly,
blocking it open if necessary.
PLEASE NOTE: In the event of a power failure, any modified settings will be lost
and the default settings will be restored once the power resumes.
www.newair.com
20