NewAir NKR058MB00 Owner's Manual page 14

Beer Tower Installation
Tower Gasket Installation
Before installing the beer tower, position the rubber beer tower gasket (see
figure) directly on top of the cabinet, aligning the four holes in the gasket with
the four holes on the cabinet.
Beer Tower Installation
1. Remove the top plug by twisting and pulling it out. (Note: Save it for later
use if you decide to convert the unit to a refrigerator.)
2. Unravel the beer line (clear hose) and insert the beer line and wing nut
through the uncovered hole on top.
3. Place the beer tower on top of the gasket and make sure to position the
beer faucet so it is aligned with the cabinet front.
www.newair.com
EN
14