NewAir NKR058MB00 Owner's Manual page 13

CO2 Cylinder Holder Installation
1. Match up the holes on the holder with the screws jutting out of the back of
the cabinet.
2. Slide the holder down to lock it in place.
3. No tools are required, simply align the holes with the screws and push
down firmly.
4. Place your full CO2 cylinder into the holder. (Note: You may also place the
CO2 cylinder onto the holder inside the cabinet.)
Stainless Steel Tap Installation
1. Screw the black faucet handle on to the faucet (1), then screw the faucet
onto the faucet adapter on the front of the tower (2).
2. Make sure the faucet is vertical with the black handle facing the ceiling,
and that the faucet is screwed on tightly.
www.newair.com
EN
13