NewAir NKR058MB00 Owner's Manual page 12

ASSEMBLY INSTRUCTIONS
Installation Overview
The diagram below shows an overview of how your Kegerator comes together
once fully assembled. Read the following sections carefully for detailed
instructions on how to assemble your Kegerator step-by-step.
Casters Installation
1. Before beginning, make sure the unit is empty – including the removeable
shelves.
2. Then, carefully tip the Kegerator on its side.
3. Connect the casters to the cabinet by screwing in each metal bracket into
one of four caster holes.
4. The casters with the brakes should be placed in the front of the cabinet
and require the washers.
5. When done, carefully set the unit upright.
www.newair.com
EN
12