Toyota BT lifter LHM075H Operator's Manual page 135

5.4.4 LHM230P user manual
The instructions below is an addendum to other information in the manual,
and apply specifically to this truck.
LHM230P is not to be used in wet environments or in environments with ex-
treme temperature changes.
WARNING Release of energy in the tow bar
It may injure people or damage the truck.
Never use the starting aid as a brake. Never activate the control for the
►
starting aid in the opposite direction when the truck is moving.
WARNING Risk of crushing
Never have a finger under the lock lever.
Never hold on to the linkage for the starting aid.
►
a
b
a) Starting aid cable
b) Checking the cable tension
c) Lowering control
d) Starting aid
e) Starting aid catch
f) Starting aid neutral position
Before using the truck, check that the starting aid cable is not damaged.
▷
Check the operation of the starting aid cable, and adjust the cable ten-
▷
sion if needed.
Move the lowering control to the neutral position when the starting aid is
▷
to be used.
d
f
d
e
Working with the truck
c
5
135