Toyota BT lifter LHM075H Operator's Manual page 133

Symbol
Handling
Resetting
It is important that the truck is reset before each weighing:
1) Press the green button to start the indicator.
2) Lift the forks, without a load, to reading level. The tongues of the indic-
ator are opposite each other.
3) Press the button to reset.
Weighing
Please note that the forks must be lifted so that the tongues of the indicator
are opposite each other when reading the weight, just as they should be
when resetting.
Do not touch the indicator when weighing is performed or when the
▷
weight is read.
The weight should be read within 10 seconds after weighing in order to
▷
ensure correct weight.
Description
Calibration
Lower value
Calibration
Higher value
On/Off
Correction
Working with the truck 5
133