Examples Of Mstconfig Usage - Nvidia MSTFLINT Documentation

-u|--key_uuid
clear_semaphore
i[show_confs]
q[uery]
r[eset]
s[et]
set_raw
get_raw
backup
gen_tlvs_file
g[en_xml_template]
xml2raw
raw2xml
xml2bin
create_conf
apply

Examples of mstconfig Usage

Querying the Device Configuration
To query the device's configuration, use the following command line:
# mstconfig -d <device> query
ConnectX-3 Example:
# mstconfig -d 41:00.0
Keypair uuid
Clear the tool semaphore.
Display information about all configurations.
Query supported configurations.
Reset all configurations to their default value.
Set configurations to a specific device.
Set raw configuration file.(only Connect-IB/ConnectX-4/Lx)
Gets raw configuration file (5th generation/Group II devices only)
Backup configurations to a file (only Connect-IB/ConnectX-4/Lx).
Use set_raw command to restore file.
Generate List of all TLVs. TLVs output file name must be specified.
(*)
Generate XML template. TLVs input file name and XML output file
name must be specified. (*)
Generate binary configuration dump file from XML file. XML input
file name and bin output file name must be specified. (*)
Generate configuration file from XML file. XML input file name and
bin output file name must be specified. (*)
Apply a configuration file, that was created with create_conf
command. bin input file name must be specified. (*)
Generate Configuration file from XML file. XML input file name
and bin output file name must be specified. (*)
Apply a Configuration file. bin input file name must be specified.
(*)
q
24