Table of Contents
Advertisement
Internal Ref.
No.
Keywords: mstlink, LID, InBand, OpenSM
Discovered in Version: 4.20.0
2823492
Description: mstfwreset is not supported on DPU with GPU boards.
Workaround: N/A
Keywords: mstfwreset
Discovered in Version: 4.18.0
2715716
Description: mstfwreset is not supported on secure-boot host devices.
Workaround: N/A
Keywords: mstfwreset
Discovered in Version: 4.18.0
2752916
Description: The information of the IB/ETH protocols should not be stored on the same
CSV file. Doing so will result in a mismatch on the columns of CSV file.
Workaround: N/A
Keywords: mstlink
Discovered in Version: 4.18.0
2838222
Description: mlxfwreset is not supported on kernel 3.10.0-1062.el7.x86_64 due to a
kernel bug that leads to 'rescan' PCI operation to take a few minutes.
Workaround: N/A
Keywords: mstfwreset
Discovered in Version: 4.18.0
2670833
Description: Burning firmware using DMA might fail on virtual FreeBSD machines.
Workaround: N/A
Keywords: Firmware burning, DMA, FreeBS, VM
Discovered in Version: 4.17.0
2484780
Description: Configuring TX/RX_rate to 200GbE in test mode fails.
Workaround: To work with the new speeds specify the number of lanes as shown below:
Keywords: 200GbE, Tx/Rx
•
100G_1X/200G_2X/400G_4X/800G_8X for NDR speeds
•
50G_1X/100G_2X/200G_4X/400G_4X for HDR speeds
Issue
15
Advertisement
Table of Contents
