Table of Contents
Advertisement
-l|--level
-v|--version
--ignore_old_events
Device-Specific Information:
•
Connect-IB, ConnectX-4, ConnectX-4 Lx, Switch-IB, Switch-IB 2, Spectrum, Quantum:
iRISC names: [all]
•
ConnectX-5, ConnectX-5 Ex, BlueField, ConnectX-6, Spectrum 2
iRISC names: [all]
•
Trace classes:
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG, CMD_IF, PHY_IB, PHY_RX_ADAP,
PHY_EYE_OPN, PHY_COMMON, PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD, RXT_CHECKS,
I2C, TRANSPORT, FW_LL, RX_ERRORS, CMD_DRIVER, PROFILING, MANAGEMENT, FLASH,
STEERING, IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH, VIRT
Example:
# mstfwtrace -d
Read old events:
[0x28ed5b22771a5]
<state_31_28,cmd_ix_20_16,gvmi_15_0>=0x10000001,
[0x28ed5b227b160]
[0x28ed5b228297f]
<state_31_28,cmd_ix_20_16,gvmi_15_0>=0x10000001,
[0x28ed5b2284365]
Read
new
events:
[0x28edf8a8a3788]
<state_31_28,cmd_ix_20_16,gvmi_15_0>=0x10000001,
[0x28edf8a8a5bc0]
[0x28edf92960db4]
<state_31_28,cmd_ix_20_16,gvmi_15_0>=0x10000001,
[0x28edf929623dd]
mstregdump Utility
The mstdump utility dumps device internal configuration registers. The dump file is used by NVIDIA
Support for hardware troubleshooting purposes. It can be applied on all NVIDIA devices.
mstdregump Usage
To run mstregdump:
# mstregdump [-full] <mst device> > <dump file>
where the -full flag dumps all internal registers.
Example:
[root@mymach]# mstregdump
This dumps the internal configuration data of the device into the file mt4099.dmp.
Trace level
Print tool's version and exit
Ignore collecting old events
41:00.1
-i all
0
[0xa1] IRON populate_local_dbase end entry_ix=0x0,
0
[0xa5] access_reg:
register_id=0x9043
0
[0xa1] IRON populate_local_dbase end entry_ix=0x0,
0
[0xa3] access_reg:
register_id=0x9043
0
[0xa1] IRON populate_local_dbase end entry_ix=0x0,
0
[0xa5] access_reg:
register_id=0x9043
0
[0xa1] IRON populate_local_dbase end entry_ix=0x0,
0
[0xa2] access_reg:
register_id=0x9043
41:00.0
> mt4099.dmp
cause_been_set=0
cause_been_set=0
cause_been_set=0
cause_been_set=0
69
Advertisement
Table of Contents
