Release Notes Revision History; Mstflint Release Notes Change Log History - Nvidia MSTFLINT Documentation

Hide thumbs Also See for MSTFLINT:
Table of Contents

Advertisement

Release Notes Revision History

mstflint Release Notes Change Log History

Component /
Tool
Anti-rollback
Enabled Anti-rollback protection to prevent old vulnerable firmware
Protection
versions from being flashed to the device.
DSFP Modules
Added support for DSFP modules in mstlink.
Parallel Firmware
Added support for parallel firmware burning. Although DMA burning is
Burning (DMA
supported in Virtual Machines as well, burning in such scenarios might
Burning)
be slower than on Physical Machines.
Note: If the NIC driver is unloaded, burning via DMA is unsupported (due
to BME is unset) and regular burn flow will be executed instead. 
Note: This capability is supported in 5th Generation devices only.
Note: This capability requires mstflint kernel module to work.
Bug Fixes
See Bug
mstresourcedump
Added support for "--virtual-hca-id" command. Now the tool can provide
info on the virtual HCA (host channel adapter, NIC) ID.
For further information see
mstlink
HDR lane rate is now supported when in Pseudorandom Binary Sequence
(PRBS) mode.
mstreg
Increased the registry keys the tool supports and now it exposes the full
PRM. For additional information, refer to the PRM.
mstconfig
BOOT_INTERRUPT_DIS parameter was added to mlxconfig. When TRUE,
legacy interrupts should not be used for receive/transmit indication.
Polling should be used instead.
Note: This is supported only if boot_legacy_interrupt_disable_supported
is set to TRUE.
mstflint
Enables the user to to insert information manually to the flash on
components such as MFG/DEV GUID/MAC when no information exists
after the burn process using the command
<guid>"
MAC information will be used instead.
mstflint (Querying
Enables the user to query the MFA2 file using a PSID. For additional
the MFA2 File)
information, refer to
Description
Rev. 4.17.0
Fixes.
Rev. 4.14.0-1
.resourcedump Utility v4.18.1
. If the information is not inserted manually, the existing GUID/
Querying the MFA2
"mstflint -d <device> sg
File.
Operating
System
All
All
Linux /
FreeBSD
All
Linux
All
All
All
All
All
96

Advertisement

Table of Contents
loading

Table of Contents