Maintenance and care
The KENDRO service offer
Kendro Laboratory Products recommends annual ser-
vicing of the centrifuge and the accessories by author-
ized customer service or trained professionals. The
customer service personnel is inspecting:
• the electrical installations
• the suitability of the location
• the lid lock mechanism and the safety circuit
• the rotor
• the rotor fastening and the drive shaft
Defective material is exchanged.
KENDRO offers inspection and service contracts cov-
ering it. Inspection costs are charged as flat-rate con-
tracts.
Necessary repairs are carried out free of cost within
the warranty conditions, and against payment after
expiration of the warranty period.
44
Warranty conditions
The warranty period starts with the day of delivery.
Within the warranty period the centrifuge is repaired or
replaced free of cost if there are provable faults in ma-
terials or workmanship.
Conditions for a warranty are:
• the centrifuge is used according to the instructions
of use
• mounting, extensions, settings, alterations or re-
pairs are carried out exclusively by personnel au-
thorized by KENDRO
• the required maintenance and care procedures are
carried out regularly.