TANDBERG Codec C90 D14128.02 System Integration Manual page 77

Codec C90
Contents Introduction
The Preset commands
xCommand Preset Activate
Activate local preset. Will move camera to predefined position.
Required parameters with (r):
PresetId(r): <1..15>
Example:
xCommand Preset Activate PresetId:3
OK
*r PresetActivateResult (status=OK):
*r/end
xCommand Preset Clear
Delete a preset storing a camera position.
Required parameters with (r):
PresetId(r): <1..15>
Example:
xCommand Preset Clear PresetId:3
OK
*r PresetClearResult (status=OK):
*r/end
D14128.02—NOVEMBER 2008
Getting Started Interfaces About the API
xCommand
xConfiguration xCommand xStatus
xCommand Preset Store
Store current camera position. System may hold 15 predefined camera positions (presets).
Required parameters with (r):
PresetId(r): <1..15>
Type(r): <All/Camera>
Description(r): <S: 0, 255>
Example:
xCommand Preset Store PresetId:3 Type:Camera Description:"Left view"
OK
*r PresetStoreResult (status=OK):
*r/end
System Integrator Guide
Cameras Appendices Contact us
77