Table of Contents
Advertisement
Codec C90
Contents
Introduction
Best view—Face recognition
This camera is capable of face recognition when used with
TANDBERG C90 Codecs. Consequently, the functionality is subject
to change without further notice in order to take advantage of further
developments.
NOTE:
Observe that the Best view feature is still a preview feature.
The face recognition system aims to search for faces in order to
optimize the picture frame, hence the name Best view. Once a face
or group of faces has been detected camera zoom and camera angle
will be changed accordingly to obtain an optimal presentation on the
screen.
Kindly observe the following:
•
The
Best view optimization process may take up to 5 seconds.
•
The detection of faces works better when people look towards the
camera.
•
The area from the eyebrows down to just below the lips should be
uncovered.
•
Beard is normally not a problem.
Using Best view
Note that Best view works with TANDBERG C90 Codecs only!
1.
Press the
Layout key on the remote control to display the
Layout menu. Select Selfview to be shown as required.
2.
Press the
Home key on the remote control to display the
Home menu and select Camera control
3.
In the Camera control menu, locate the
bottom of the screen.
4.
Press the corresponding
Soft key on the remote control to start
the Best view optimization process. Look towards the camera for
about five seconds.
5.
The system will now look for human faces and adjust the zoom
and camera angle to obtain a best fit.
D14128.02—NOVEMBER 2008
Getting Started
Interfaces
About the API
The Best view feature is found
in the Camera control menu.
Best view button at the
xConfiguration
xCommand
xStatus
System Integrator Guide
Cameras
Cameras
Appendices
Best view (beta)
Exit
Press the corresponding
Soft key to start the Best
view optimization process.
1
.
2
3
@
abc
def
4
5
6
ghi
jkl
mno
7
8
9
pqrs
tuv
wxyz
0
#
abc/123
Contact us
108
Advertisement
Table of Contents
