TANDBERG Codec C90 D14128.02 System Integration Manual page 17

Codec C90
Contents Introduction
Rear panel sockets
overview
The TANDBERG Codec C90 offers a great flexibility
in connecting audio and video equipment to the
system.
The illustration below shows the rear panel of the
TANDBERG Codec C90.
Inputs Outputs TANDBERG Basic
Setup
The main connectors
for TANDBERG basic
1 1
setup are highlighted
in orange.
* Not supported in version 1
** For future use
Codec C90 Rear Panel
Video sockets
Video sockets
D14128.02—NOVEMBER 2008
Interfaces
Getting Started Interfaces About the API
Video sockets
The video input sockets are:
4 x HDMI
4 x HD-SDI
2 x DVI-I
2 x Analog Component (Y-Pr-Pb)
1 x Composite* or 1 x S-Video(YC)*
The video output sockets are:
2 x HDMI
2 x DVI-I
1 Composite
Audio sockets
GPIO and USB
xConfiguration xCommand
Audio sockets
The audio input sockets are:
8 x XLR Female - Microphone/Line In
4 x RCA - Line In (1 Left, 2 Right, 3 Left, 4 Right)
2 x HDMI
The audio output sockets are:
2 x XLR Male - Line Out
4 x RCA - 1 Left (SPDIF), 2 Right, 3 Left
(SPDIF), 4 Right
2 x HDMI
The following pages gives a detailed description of the rear panel sockets and connectors.
Audio sockets
System Integrator Guide
xStatus Cameras Appendices
Other sockets
The other sockets are:
Ethernet 1 and Ethernet 2*
COM - Serial data port
Camera control - Serial port for camera control
Power socket
Grounding - Chassis grounding
Power On/Off switch
GPIO**, USB Host**, USB Device**, T Link**
T Link Network COM Port,
interface Camera
sockets Control
Contact us
Power Power
socket switch
17