TANDBERG Codec C90 D14128.02 System Integration Manual page 72

Codec C90
Contents Introduction
The DTMF Send command
xCommand DTMFSend
Send DTMF tones to the far end.
Required parameters with (r):
CallId(r): <0..65534>
DTMFString(r): <S: 0, 32>
Example:
xCommand DTMFSend CallId:2 DTMFString:1234
*r DTMFSendResult (status=OK):
*r/end
OK
D14128.02—NOVEMBER 2008
Getting Started Interfaces About the API
xCommand
xConfiguration xCommand xStatus
The TString Send command
xCommand TStringSend
Used to send data to far end, e.g. for Telepresence control systems. Uses the H.245 control channel (TCP).
Only works with H.323 calls.
Required parameters with (r):
CallId(r): <0..65534>
Message(r): <S: 1, 1450>
Example:
xCommand TStringSend CallId:1 Message:"This is an example"
*r TStringSendResult (status=OK):
*r/end
OK
System Integrator Guide
Cameras Appendices Contact us
72