Codec C90
Contents
Introduction
xCommand Call Reject
Reject incoming call. If no call id is specified, all incoming calls will be rejected.
Required parameters with (r):
CallId: <0..65534>
Example:
xCommand Call Reject CallId:20
OK
*r CallRejectResult (status=OK):
*r/end
The Call Log commands
xCommand CallLog Clear
Clear all call logs.
Example:
xCommand CallLog Clear
*r ClearResult (status=OK):
*r/end
xCommand CallLog Recent Delete
Delete log of recent calls.
Required parameters with (r):
LogTag: <0..2147483647>
Example:
xCommand CallLog Recent Delete
*r DeleteResult (status=OK):
*r/end
D14128.02—NOVEMBER 2008
Getting Started
Interfaces
About the API
xCommand
xConfiguration
xCommand
xStatus
xCommand CallLog Outgoing Delete
Delete log of outgoing calls.
Required parameters with (r):
LogTag: <0..2147483647>
Example:
xCommand CallLog Outgoing Delete LogTag:202
*r DeleteResult (status=OK):
*r/end
xCommand CallLog Received Delete
Delete log of received calls.
Required parameters with (r):
LogTag: <0..2147483647>
Example:
xCommand CallLog Received Delete LogTag:126
*r DeleteResult (status=OK):
*r/end
xCommand CallLog Missed Delete
Delete log of missed calls.
Required parameters with (r):
LogTag: <0..2147483647>
Example:
xCommand CallLog Missed Delete LogTag:119
*r DeleteResult (status=OK):
*r/end
System Integrator Guide
Cameras
Appendices
Contact us
68