Subscribe to Our Youtube Channel
Related Manuals for Sunny Health & Fitness SF-B1002
Summary of Contents for Sunny Health & Fitness SF-B1002
- Page 1 BELT DRIVE INDOOR CYCLING BIKE SF-B1002 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner’s manual future reference. customer service, please contact: support@sunnyhealthfitness.com...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be assured if the equipment is assembled, maintained, and used properly. -
Page 3: Exploded Drawing
EXPLODED DRAWING S14-15-17... -
Page 4: Parts List
PARTS LIST Description Description Belt wheel Φ204*20*5PK Main frame Saddle post Belt 5PK520 Handlebar Screw M10*16*S6 Crank cap Φ25*7 Handlebar post Adjustable bolt 41L/R Pedal YH-76X 9/16 Front stabilizer Bearing 6004-RZ NBK Rear stabilizer Jump ring d20 Wave washer d20*Φ26*0.3 Seat slider Screw M10*25*S6 Nut M10*1.25*H7.5*S14... - Page 5 Description Description Washer Φ30*Φ10.1*3 Allen wrench S6 Bolt M10*16*S6 Spanner S14-15-17 Shipping rear tube Open end wrench S13-15 Shipping front tube...
-
Page 6: Hardware Package
HARDWARE PACKAGE #9 (M10*25*S6) 4PCS #10 (d10*Φ20*2.0) 4PCS #19 (M10*25*S6) 2PCS #20 (d10*Φ20*1.5) 2PCS... - Page 7 ASSEMBLY INSTRUCTIONS STEP 1: Unscrew the Screws (No. 74) with Allen Wrench (No. 77) and remove the Washers (No. 10), Shipping Rear Tube (No. 75) and Shipping Front Tube (No. 76). You may discard these parts or save them in case you’d like to repackage the item in the future.
- Page 8 #9 M10*25*S6 4PCS #10 d10*Φ20*2.0 4PCS STEP 2: Attach the Front and Rear Stabilizers (No. 6 & No. 7) to the Main Frame (No. 1) using 4 Screws (No. 9) and 4 Washers (No. 10). Tighten and secure with Allen Wrench (No. 77).
- Page 9 #22 M5*12*Φ8.5 2PCS #23 d5*Φ13*1 2PCS STEP 3: Before you begin, immobilize the crank arms by turning the tension knob all the way to the right. Left Pedal: Align the Left Pedal (No. 41L) with the Left Crank Arm (No. 36L) at 90 degrees.
- Page 10 STEP 4: Loosen and remove the [saddle post] Adjustment Knob (No. 16). Insert Saddle Post (No. 2) into the sleeve located on the back of the Main Frame (No. 1). Adjust the Saddle Post (No. 2) to the desired position and reinsert and tighten Adjustment Knob (No. 16) to secure the post in place.
- Page 11 #19 M10*25*S6 2PCS #20 d10*Φ20*1.5 2PCS STEP 5: Loosen and remove the [handlebar] Adjustment Knob (No. 16). Insert Handlebar Post (No. 4) into the sleeve located on the front of the Main Frame (No. 1). Adjust the Handlebar Post (No. 4) to the desired position and reinsert and tighten the Adjustment Knob (No.
- Page 12 ADJUSTMENTS & USAGE GUIDE ADJUSTING THE BALANCE In order to achieve a smooth and comfortable ride, you must ensure that the stability of the bike is secured. If you notice that the bike is unbalanced during use, you should adjust the foot levelers located beneath the front and rear stabilizers. To do so, unscrew the Nut (No.
- Page 13 ADJUSTING THE TENSION & EMERGENCY STOP Adjust the tension by rotating the Tension Knob (No. 47) clockwise to increase the level of resistance. Rotate the knob counter-clockwise to decrease the level of resistance. Push down on Tension Knob (No. 47) to enforce the brake and stop the bike immediately.
Need help?
Do you have a question about the SF-B1002 and is the answer not in the manual?
Questions and answers