Installation - AT&T Synapse Installation Manual

Synapse Installation Guide
I
NSTALLATION
This section describes the physical installation of the Synapse devices. Each system must
include at least one PSTN Gateway, one T1 Gateway, or one SIP Gateway. Each PSTN
Gateway supports up to four analog telephone lines. Up to four PSTN Gateways can
support up to 16 analog telephone lines. The T1 Gateway supports up to 23 T1 PRI voice
channels.
"System Overview" on page 7

"Recommended Installation Sequence" on page 13

"Planning Your System and Network Configuration" on page 15

"Site Preparation" on page 26

"Assigning Telephone Lines and Extensions" on page 28

"Gateway and ATA Placement" on page 31

"Gateway Installation" on page 35

"Deskset Installation" on page 38

"SB67050 ATA Installation" on page 45

"SB67040 Cordless Handset Installation" on page 50

"TL7600 Cordless Headset Installation" on page 53.

You can view Synapse installation videos at
www.telephones.att.com/smb
Product Support and then Video Gallery.

Installation

. In the left navigation menu, click
6
Back to Contents
C
H A P T E R
1