Siemens SCALANCE TAP104 Operating Instructions Manual page 7

Simatic net network components
Table of Contents

Advertisement

Catalogs
You will find the article numbers for the Siemens products of relevance here in the following
catalogs:
• SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI
• SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog ST 70
• Industry Mall - catalog and ordering system for automation and drive technology, Online
catalog
de&language=en)
You can request the catalogs and additional information from your Siemens representative.
Device defective
If a fault develops, send the device to your SIEMENS representative for repair. Repairs on-site are
not possible.
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the WEEE
directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified
disposal company for electronic scrap or your Siemens contact (Product return
support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
Trademarks
The following and possibly other names not identified by the registered trademark sign
registered trademarks of Siemens AG:
SCALANCE, C-PLUG, OLM
SCALANCE TAP
Operating Instructions, 06/2022, C79000-G8976-C447-03
(https://mall.industry.siemens.com/goos/WelcomePage.aspx?regionUrl=/
Introduction
1.1 Security information
(https://
are
®
7

Advertisement

Table of Contents
loading

Table of Contents