Sff Drive Model - HP HPE ProLiant DL325 Maintenance And Service Manual

2
If the system power LED is off, verify the following conditions:
• Facility power is present.
• The power supply is installed and is working correctly.
• The power cord is attached and is connected to a power source.
• The front I/O cable is connected.
If all LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see "Power fault
LEDs".

SFF drive model

Item
1
2
Description
Power On/Standby button and
system power LED
Health LED
Status
Solid green = System on
Flashing green (1 flash per second) = Performing power on
sequence
Solid amber = System in standby
1
Off = No power present
Solid green = Normal
Flashing green (1 flash per second) = iLO is rebooting
Flashing amber = System degraded
Flashing red (1 flash per second) = System critical
2
2
Table Continued
Component identification
115