HP ProLiant DL320e Gen8 Maintenance And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Server
  5. ProLiant DL320e Gen8 v2
  6. Maintenance and service manual

HP ProLiant DL320e Gen8 Maintenance And Service Manual

Hide thumbs Also See for ProLiant DL320e Gen8:
Table of Contents

Advertisement

Quick Links

See also: Maintenance and Service Manual , User Manual
HP ProLiant DL320e Gen8 Server
Maintenance and Service Guide
Abstract
This document is for an experienced service technician. It is helpful if you are qualified in the servicing of computer equipment and trained in
recognizing hazards in products with hazardous energy levels and are familiar with weight and stability precautions for rack installations.
Part Number: 682829-002
October 2013
Edition: 2

Advertisement

Table of Contents
loading

Related Manuals for HP ProLiant DL320e Gen8

Summary of Contents for HP ProLiant DL320e Gen8

  • Page 1 HP ProLiant DL320e Gen8 Server Maintenance and Service Guide Abstract This document is for an experienced service technician. It is helpful if you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels and are familiar with weight and stability precautions for rack installations.
  • Page 2 © Copyright 2012, 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

  • Page 3: Table Of Contents

    Contents Customer self repair ........................6 Parts only warranty service ......................... 6 Illustrated parts catalog ....................... 16 Mechanical components ........................... 16 System components ..........................19 Removal and replacement procedures ................... 25 Required tools ............................25 Safety considerations ..........................25 Preventing electrostatic discharge ....................25 Symbols on equipment ........................
  • Page 4 Troubleshooting .......................... 68 Troubleshooting resources ........................68 Diagnostic tools .......................... 69 HP Insight Diagnostics ..........................69 HP Insight Diagnostics survey functionality ..................69 HP Insight Remote Support software ......................69 HP ROM-Based Setup Utility ........................70 Integrated Management Log ........................70 USB support and functionality ........................
  • Page 5 HP 350 W 1U Factory Integrated Power Supply ................90 HP 460 W CS Gold Hot-plug Power Supply (92% efficiency) .............. 91 HP 460 W CS Platinum Plus Hot-plug Power Supply (94% efficiency) ........... 91 Hot-plug power supply calculations ....................92 Acronyms and abbreviations ......................

  • Page 6: Customer Self Repair

    HP specifies in the materials shipped with a replacement CSR part whether a defective part must be returned to HP. In cases where it is required to return the defective part to HP, you must ship the defective part back to HP within a defined period of time, normally five (5) business days. The defective part must be returned with the associated documentation in the provided shipping material.
  • Page 7 HP sono realizzati con numerosi componenti che possono essere riparati direttamente dal cliente (CSR, Customer Self Repair). Se in fase di diagnostica HP (o un centro di servizi o di assistenza HP) identifica il guasto come riparabile mediante un ricambio CSR, HP lo spedirà direttamente al cliente per la sostituzione.
  • Page 8 La mancata restituzione del componente può comportare la fatturazione del ricambio da parte di HP. Nel caso di riparazione da parte del cliente, HP sostiene tutte le spese di spedizione e resa e sceglie il corriere/vettore da utilizzare.
  • Page 9 Si, durante la fase de diagnóstico, HP (o los proveedores o socios de servicio de HP) identifica que una reparación puede llevarse a cabo mediante el uso de un componente CSR, HP le enviará dicho componente directamente para que realice su sustitución. Los componentes CSR se clasifican en dos categorías:...
  • Page 10 HP podrá cobrarle por el de sustitución. En el caso de todas sustituciones que lleve a cabo el cliente, HP se hará cargo de todos los gastos de envío y devolución de componentes y escogerá la empresa de transporte que se utilice para dicho servicio.
  • Page 11 Opcional – Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o reparo feito pelo cliente. No entanto, se desejar que a HP as substitua, pode haver ou não a cobrança de taxa adicional, dependendo do tipo de serviço de garantia destinado ao produto.
  • Page 12 No caso desse serviço, a substituição de peças CSR é obrigatória. Se desejar que a HP substitua essas peças, serão cobradas as despesas de transporte e mão-de-obra do serviço. Customer self repair 12...
  • Page 13 Customer self repair 13...
  • Page 14 Customer self repair 14...
  • Page 15 Customer self repair 15...

  • Page 16: Illustrated Parts Catalog

    Illustrated parts catalog Mechanical components Item Description Spare part Customer self repair number (on page 6) Access panel 686658-001 Mandatory Air baffle 686661-001 Mandatory Optical drive blank 707300-001 Mandatory SFF drive blank 670033-001 Mandatory LFF drive blank 675039-001 Mandatory Capacitor pack holder 675036-001 Mandatory Non-hot-plug power supply bracket...
  • Page 17 Optional—Parts for which customer self repair is optional. These parts are also designed for customer self repair. If, however, you require that HP replace them for you, there may or may not be additional charges, depending on the type of warranty service designated for your product.
  • Page 18 Optional: Opcional—Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o reparo feito pelo cliente. No entanto, se desejar que a HP as substitua, pode haver ou não a cobrança de taxa adicional, dependendo do tipo de serviço de garantia destinado ao produto.

  • Page 19: System Components

    System components Item Description Spare part Customer self repair (on number page 6) DIMMs — — a) 2 GB, single-rank x8 PC3-12800E-11 664633-001 Mandatory b) 2 GB, single-rank x8 PC3L-10600E-9* 664694-001 Mandatory c) 4 GB, dual-rank x8 PC3-12800E-11* 664034-001 Mandatory d) 4 GB, dual-rank x8 PC3L-10600E-9* 664695-001 Mandatory...
  • Page 20 Item Description Spare part Customer self repair (on number page 6) d) 2.80-GHz Intel Core i3-3220T processor, 2C, 3 MB, 701533-001 Optional 35 W* e) 2.90-GHz Intel Core i3-3240T processor, 2C, 3 MB, 701532-001 Optional 35 W* f) 3.10-GHz Intel Pentium G2120 processor, 2C, 3 MB, 703516-001 Optional 55 W*...
  • Page 21 Four-bay LFF hot-plug drive cage assembly* 686649-001 Mandatory Eight-bay SFF hot-plug drive cage assembly 686651-001 Mandatory HP 350 W 1U Factory Integrated Power Supply Kit 686679-001 Mandatory HP 460 W CS Gold Hot-Plug Power Supply Kit 511777-001 Mandatory RPS enablement kit...
  • Page 22 Optional—Parts for which customer self repair is optional. These parts are also designed for customer self repair. If, however, you require that HP replace them for you, there may or may not be additional charges, depending on the type of warranty service designated for your product.
  • Page 23 Optional: Opcional—Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o reparo feito pelo cliente. No entanto, se desejar que a HP as substitua, pode haver ou não a cobrança de taxa adicional, dependendo do tipo de serviço de garantia destinado ao produto.
  • Page 24 Illustrated parts catalog 24...

  • Page 25: Removal And Replacement Procedures

    T-25 Torx screwdriver (for screws located inside the front panel quick-release levers) • Flathead screwdriver • HP Insight Diagnostics (on page 69) Safety considerations Before performing service procedures, review all the safety information. Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts.

  • Page 26: Server Warnings And Cautions

    Get help to lift and stabilize the product during installation or removal, especially when the • product is not fastened to the rails. HP recommends that a minimum of two people are required for all rack server installations. A third person may be required to help align the server if the server is installed higher than chest level.

  • Page 27: Rack Warnings

    Extend the server from the rack (on page 29). If you are performing service procedures in an HP, Compaq branded, Telco, or third-party rack cabinet, you can use the locking feature of the rack rails to support the server and gain access to internal components.

  • Page 28: Remove The Security Bezel (Optional)

    Remove the security bezel (optional) To access the front panel components, unlock and then remove the security bezel. Power down the server Before powering down the server for any upgrade or maintenance procedures, perform a backup of critical server data and programs. WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the power cord to remove power from the server.

  • Page 29: Extend The Server From The Rack

    If using a friction rail system, to perform installations or maintenance that requires access panel • removal, remove the server from the rack. To extend the server from an HP, Compaq-branded, Telco, or third-party rack: Power down the server (on page 28). Remove all power: Disconnect each power cord from the power source.

  • Page 30: Remove The Server From The Rack

    To access the server rear panel: Release the cable management arm. Open the cable management arm. The cable management arm can be right-mounted or left-mounted. Remove the server from the rack Removal and replacement procedures 30...

  • Page 31: Drive Blank Or Carrier

    Get help to lift and stabilize the product during installation or removal, especially when the product is not fastened to the rails. HP recommends that a minimum of two people are required for all rack server installations. A third person may be required to help align the server if the server is installed higher than chest level.

  • Page 32: Storage Drive

    • In a hot-plug drive configuration, remove the drive blank. To replace the LFF drive blank, slide the component into the bay until it clicks. To replace the SFF drive blank, while pressing the release latch, slide the component into the bay until it is fully seated.

  • Page 33: Hot-Plug Drive

    Remove the drive from the carrier. To replace the component, reverse the removal procedure. Hot-plug drive CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank. To remove the component: Back up all server data on the drive.

  • Page 34: Hot-Plug Power Supply

    Remove the power supply blank. To replace the component, reverse the removal procedure. Hot-plug power supply CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank. To remove the component: Power down the server (on page 28).

  • Page 35: Access Panel

    Power redundancy requires the presence of two power supply modules in the system. CAUTION: The default and redundant power supplies in the server must have the same output power capacity. Verify that all power supplies have the same part number and label color. The system becomes unstable and might shut down when it detects mismatched power supplies.

  • Page 36: Optical Drive

    Remove the air baffle. To replace the component, reverse the removal procedure. Optical drive CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank. To remove the component: Power down the server (on page 28).
  • Page 37 Four-bay LFF configuration Eight-bay SFF configuration Removal and replacement procedures 37...

  • Page 38: Drive Cage Assembly

    Disconnect the optical drive cable from the drive. To replace the component, reverse the removal procedure. Drive cage assembly The drive cage assembly includes the drive cage with backplane and the front panel assembly. To remove the component: Power down the server (on page 28). Remove all power: Disconnect each power cord from the power source.

  • Page 39: Fan Module

    Remove the drive cage assembly. To replace the component, reverse the removal procedure. Fan module CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with either a component or a blank. To remove the component: Power down the server (on page 28).

  • Page 40: Dimms

    Populate the DIMM slots in this sequence: 3-A, 1-B, 4-C, 2-D. Use HP-qualified UDIMMs. For detailed memory configuration rules and guidelines, use the Online DDR3 Memory Configuration Tool on the HP website (http://www.hp.com/go/ddr3memory-configurator). Removing a DIMM Power down the server (on page 28).

  • Page 41: Heatsink

    Disconnect each power cord from the server. Do one of the following: Extend the server from the rack (on page 29). Remove the server from the rack (on page 30). Remove the access panel ("Access panel" on page 35). Remove the air baffle ("Air baffle"...
  • Page 42 Remove the heatsink from the processor backplate. To replace the component: Clean the old thermal grease from the processor with the alcohol swab. Allow the alcohol to evaporate before continuing. Remove the thermal interface protective cover from the heatsink. CAUTION: Do not overtighten the screws as this might damage the board, connectors, or screws and voids the warranty of the board.

  • Page 43: Processor

    Finish the installation by completely tightening the screws in the same sequence. Install the air baffle. Install the access panel. Do one of the following: Slide the server into the rack. Install the server into the rack. Connect each power cord to the server. Connect each power cord to the power source.
  • Page 44 Extend the server from the rack (on page 29). Remove the server from the rack (on page 30). Remove the access panel ("Access panel" on page 35). Remove the air baffle ("Air baffle" on page 35). Remove the heatsink ("Heatsink" on page 41). CAUTION: To avoid damage to the processor, do not touch the bottom of the processor, especially the contact area.
  • Page 45 Install the processor. Use the notches on both sides of the processor to properly align it into the socket. CAUTION: Be sure to close the processor socket retaining bracket before closing the processor locking lever. The lever should close without resistance. Forcing the lever closed can damage the processor and socket, requiring system board replacement.

  • Page 46: Pci Riser Cage

    CAUTION: Do not overtighten the screws as this might damage the board, connectors, or screws and voids the warranty of the board. Install the heatsink: Position the heatsink on the processor backplate. Tighten one pair of diagonally opposite screws halfway, and then tighten the other pair of screws. Finish the installation by completely tightening the screws in the same sequence.

  • Page 47: Expansion Board

    Remove the server from the rack (on page 30). Remove the access panel ("Access panel" on page 35). Disconnect all cables connected to existing expansion boards. Loosen the PCI riser cage thumbscrews. Lift the PCI riser cage to unseat the PCI riser boards. To replace the component, reverse the removal procedure.

  • Page 48: Pcie Riser Board

    Remove the expansion board. To replace the component, reverse the removal procedure. PCIe riser board To remove the component: Power down the server (on page 28). Remove all power: Disconnect each power cord from the power source. Disconnect each power cord from the server. Do one of the following: Extend the server from the rack (on page 29).

  • Page 49: Flash-Backed Write Cache Procedures

    Low-profile riser board To replace the component, reverse the removal procedure. Flash-backed write cache procedures The following types of procedures are provided for the FBWC option: • Removal and replacement of failed components: Removing the cache module ("FBWC module" on page 49) Removing the capacitor pack ("Capacitor pack"...

  • Page 50: Capacitor Pack

    Do one of the following: Extend the server from the rack (on page 29). Remove the server from the rack (on page 30). Remove the access panel ("Access panel" on page 35). Remove the PCI riser cage ("PCI riser cage" on page 46). CAUTION: When connecting or disconnecting the capacitor pack cable, the connectors on the cache module and cable are susceptible to damage.
  • Page 51 CAUTION: In systems that use external data storage, be sure that the server is the first unit to be powered down and the last to be powered back up. Taking this precaution ensures that the system does not erroneously mark the drives as failed when the server is powered up. To remove the component: Power down the server (on page 28).

  • Page 52: Capacitor Pack Holder

    Remove the capacitor pack. To replace the component, reverse the removal procedure. Capacitor pack holder To remove the component: Power down the server (on page 28). Remove all power: Disconnect each power cord from the power source. Disconnect each power cord from the server. Do one of the following: Extend the server from the rack (on page 29).

  • Page 53: Recovering Data From The Flash-Backed Write Cache

    Set up a recovery server using an identical server model. Do not install any internal drives or FBWC in this server. (HP recommends this option.) Find a server that has enough empty drive bays to accommodate all the drives from the failed server and that meets all the other requirements for drive and array migration.

  • Page 54: Dedicated Ilo Management Port Option

    Dedicated iLO management port option To install the component: Power down the server (on page 28). Remove all power: Disconnect each power cord from the power source. Disconnect each power cord from the server. Do one of the following: Extend the server from the rack (on page 29). Remove the server from the rack (on page 30).

  • Page 55: Enabling The Dedicated Ilo Management Port

    Install the dedicated iLO management module. Install the access panel. Do one of the following: Slide the server into the rack. Install the server into the rack. Connect each power cord to the server. Connect each power cord to the power source. Power up the server.

  • Page 56: System Battery

    System battery If the server no longer automatically displays the correct date and time, then replace the battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years. WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery pack.

  • Page 57: Non-Hot-Plug Power Supply

    For more information about battery replacement or proper disposal, contact an authorized reseller or an authorized service provider. Non-hot-plug power supply To remove the component: Power down the server (on page 28). Remove all power: Disconnect each power cord from the power source. Disconnect each power cord from the server.

  • Page 58: Rps Enablement Kit

    Disconnect each power cord from the power source. Disconnect each power cord from the server. Do one of the following: Extend the server from the rack (on page 29). Remove the server from the rack (on page 30). Remove the access panel ("Access panel"...

  • Page 59: Internal Usb Connector

    Remove the server from the rack (on page 30). Remove the access panel ("Access panel" on page 35). Remove the hot-plug power supplies ("Hot-plug power supply" on page 34). Disconnect the power supply cables from the drive cage and the system board. Remove the RPS backplane module.

  • Page 60: System Board Assembly

    Disconnect each power cord from the power source. Disconnect each power cord from the server. Do one of the following: Extend the server from the rack (on page 29). Remove the server from the rack (on page 30). Remove the access panel ("Access panel"...
  • Page 61 Disconnect all cables connected to the system board. Remove all DIMMs ("Removing a DIMM" on page 40). Remove the heatsink: Loosen one pair of diagonally opposite screws halfway, and then loosen the other pair of screws. Completely loosen all screws in the same sequence. Remove the heatsink from the processor backplate.
  • Page 62 Loosen the thumbscrew, and then slide the board to the front. Use the tray handles to lift the system board out of the chassis. To replace the system board assembly: Install the system board assembly: Removal and replacement procedures 62...
  • Page 63 Hold the system board by its handles and position it on the chassis. Ensure the guide spool on the chassis is fully engaged in the corresponding board slot. Slide the system board backwards, and then tighten the thumbscrew. CAUTION: Failure to completely open the processor locking lever prevents the processor from seating during installation, leading to hardware damage.
  • Page 64 Open the processor locking lever, and then open the processor retaining bracket. Remove the processor socket cover. CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage to the system board: Do not touch the processor socket contacts. •...
  • Page 65 Install the processor. Use the notches on both sides of the processor to properly align it into the socket. CAUTION: Be sure to close the processor socket retaining bracket before closing the processor locking lever. The lever should close without resistance. Forcing the lever closed can damage the processor and socket, requiring system board replacement.
  • Page 66 Finish the installation by completely tightening the screws in the same sequence. CAUTION: When returning a damaged system board to HP, always install all processor socket covers to prevent damage to the processor sockets and system board. Install the processor socket cover on the failed system board.

  • Page 67: Hp Trusted Platform Module

    If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact an HP authorized service provider for a replacement system board and TPM board.

  • Page 68: Troubleshooting

    • Simplified Chinese (http://www.hp.com/support/ProLiant_TSG_v1_sc) The HP ProLiant Gen8 Troubleshooting Guide, Volume II: Error Messages provides a list of error messages and information to assist with interpreting and resolving error messages on ProLiant servers and server blades. To view the guide, select a language: •...

  • Page 69: Diagnostic Tools

    HP strongly recommends that you install HP Insight Remote Support software to complete the installation or upgrade of your product and to enable enhanced delivery of your HP Warranty, HP Care Pack Service, or HP contractual support agreement. HP Insight Remote Support supplements your monitoring continuously to...

  • Page 70: Hp Rom-Based Setup Utility

    Configuring memory options • Language selection For more information on RBSU, see the HP ROM-Based Setup Utility User Guide on the Documentation CD or the HP website (http://www.hp.com/support/smartstart/documentation). Integrated Management Log The IML records hundreds of events and stores them in an easy-to-view form. The IML timestamps each event with 1-minute granularity.

  • Page 71: Internal Usb Functionality

    ASR is a feature that causes the system to restart when a catastrophic operating system error occurs, such as a blue screen, ABEND (does not apply to HP ProLiant DL980 Servers), or panic. A system fail-safe timer, the ASR timer, starts when the System Management driver, also known as the Health Driver, is loaded. When the operating system is functioning properly, the system periodically resets the timer.

  • Page 72: Component Identification

    Component identification Front panel components • Four-bay LFF drive model Item Description Optical drive Serial label pull tab USB connectors LFF drives • Eight-bay SFF drive model Item Description Optical drive USB connectors Serial label pull tab SFF drives Component identification 72...

  • Page 73: Front Panel Leds And Buttons

    Front panel LEDs and buttons Item Description Status UID button/LED Solid blue = Activated Flashing blue (1 Hz/cycle per sec) = Remote management or firmware upgrade in progress Off = Deactivated Power On/Standby button Solid green = System on and system power LED Flashing green (1 Hz/cycle per sec) = Performing power on sequence Solid amber = System in standby Off = No power present*...

  • Page 74: Rear Panel Components

    Rear panel components Item Description Slot 2 PCIe x16 (16, 8, 4, 1)* Slot 1 PCIe x8 (4, 1)* Power supply 1 Power supply 2 Dedicated iLO management port (optional) UID LED button Serial connector Video connector USB connectors NIC 1/shared iLO management connector NIC connector 2 * For more information on the riser board slots supported by the onboard PCI riser connectors, see "PCIe riser board slot definitions (on page 75)."...

  • Page 75: Pcie Riser Board Slot Definitions

    Blue = Identification is activated Flashing blue = System is being managed remotely Off = Identification is deactivated Power supply LED Green = Normal (for hot-plug HP CS Off = One or more of the following conditions power supplies exists: only) •...

  • Page 76: System Board Components

    System board components Item Description PCI riser connectors* SD card slot System maintenance switch NMI header SATA connector Mini-SAS connector 4-pin power supply connector Front panel connectors Internal USB connector Fan connector 4 Fan connector 3 System battery Fan connector 2 Discovery service connector Fan connector 1 24-pin power supply connector...

  • Page 77: Dimm Slot Locations

    DIMM slot locations DIMM slots are numbered sequentially (1 through 4) for the processor. The supported AMP modes use the letter assignments for population guidelines. System maintenance switch Switch Default Function Off = No function On = iLO security is disabled Off = System configuration can be changed On = System configuration is locked...

  • Page 78: System Board Led Definitions

    Microsoft® recommends that system administrators perform an NMI event by temporarily shorting the NMI header with a jumper. The NMI event enables a hung system to become responsive again. For additional information, see the HP website (http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00797875/c00797875.pdf). System board LED definitions...

  • Page 79: Hot-Plug Drive Led Definitions

    • Eight-bay SFF drive model Hot-plug drive LED definitions Item Status Definition Locate Solid blue The drive is being identified by a host application. Flashing blue The drive carrier firmware is being updated or requires an update. Activity ring Rotating green Drive activity No drive activity Do not remove...

  • Page 80: Fbwc Module Led Definitions

    FBWC module LED definitions The FBWC module has three single-color LEDs (one amber and two green). The LEDs are duplicated on the reverse side of the cache module to facilitate status viewing. 1 - Amber 2 - Green 3 - Green Interpretation The cache module is not powered.

  • Page 81: Fan Locations

    Fan locations Component identification 81...

  • Page 82: Cabling

    For information on cabling peripheral components, refer to the white paper on high-density deployment at the HP website (http://www.hp.com/products/servers/platforms). CAUTION: When routing cables, always be sure that the cables are not in a position where they can be pinched or crimped.

  • Page 83: Four-Bay Lff Non-Hot-Plug Drive Cage Cabling

    Four-bay LFF non-hot-plug drive cage cabling • Mini-SAS cable connected to the system board Item Description Power cable 700-mm Mini-SAS cable for non-hot-plug drive configuration • Mini-SAS cable connected to a storage controller in the full-height expansion slot Item Description Power cable Capacitor pack cable 700-mm Mini-SAS cable for non-hot-plug drive configuration...

  • Page 84: Four-Bay Lff Hot-Plug Drive Cage Cabling

    • Mini-SAS cable connected to a storage controller in the low-profile expansion slot Item Description Power cable Capacitor pack cable 700-mm Mini-SAS cable for non-hot-plug drive configuration Four-bay LFF hot-plug drive cage cabling • Mini-SAS cable connected to the system board Item Description Power cable...
  • Page 85 • Mini-SAS cable connected to a storage controller in the full-height expansion slot Item Description Power cable Capacitor pack cable 890-mm Mini-SAS cable • Mini-SAS cable connected to a storage controller in the low-profile expansion slot Item Description Power cable Capacitor pack cable 890-mm Mini-SAS cable Cabling 85...

  • Page 86: Eight-Bay Sff Hot-Plug Drive Cage Cabling

    Eight-bay SFF hot-plug drive cage cabling • Mini-SAS cables connected to a storage controller in the full-height expansion slot Item Description 560-mm Mini-SAS cable 700-mm Mini-SAS cable for hot-plug drive configuration Power cable Capacitor pack cable Optical drive cabling • LFF drive cage model Cabling 86...

  • Page 87: Fan Cabling

    Item Description Optical drive power cable Optical drive SATA cable • SFF drive cage model Item Description Optical drive power cable Optical drive SATA cable Fan cabling Cabling 87...

  • Page 88: Internal Usb Cabling

    Internal USB cabling Power supply cabling Nonredundant power supply cabling Item Description 24-pin power supply cable 4-pin power supply cable Cabling 88...

  • Page 89: Redundant Power Supply Cabling

    Redundant power supply cabling Item Description 24-pin power supply cable 26-pin RPS cable 4-pin power supply cable CAUTION: The default and redundant power supplies in the server must have the same output power capacity. Verify that all power supplies have the same part number and label color. The system becomes unstable and might shut down when it detects mismatched power supplies.

  • Page 90: Specifications

    HP 350 W 1U Factory Integrated Power Supply • HP 460 W CS Gold Hot-plug Power Supply (92% efficiency) • HP 460 W CS Platinum Plus Hot-plug Power Supply (94% efficiency) HP 350 W 1U Factory Integrated Power Supply Specification Value —...

  • Page 91: Hp 460 W Cs Gold Hot-Plug Power Supply (92% Efficiency)

    400 W at 100 V to 120 V AC Maximum peak power input 400 W at 200 V to 240 V AC input HP 460 W CS Gold Hot-plug Power Supply (92% efficiency) Specification Value — Input requirements 100 V AC–240 V AC Rated input voltage 50 Hz–60 Hz...

  • Page 92: Hot-Plug Power Supply Calculations

    460 W at 200 V to 240 V AC output Hot-plug power supply calculations For hot-plug power supply specifications and calculators to determine electrical and heat loading for the server, see the HP Power Advisor website (http://www.hp.com/go/hppoweradvisor). Specifications 92...

  • Page 93: Acronyms And Abbreviations

    Advanced Memory Protection Automatic Server Recovery Customer Self Repair double data rate FBWC flash-backed write cache HP CS HP Common Slot (power supply) HP SIM HP Systems Insight Manager Integrated Lights-Out Integrated Management Log large form factor nonmaskable interrupt Acronyms and abbreviations 93...
  • Page 94 RDIMM registered dual in-line memory module redundant power supply serial attached SCSI SATA serial ATA Secure Digital small form factor HP Service Pack for ProLiant Trusted Platform Module UDIMM unregistered dual in-line memory module unit identification Acronyms and abbreviations 94...
  • Page 95 universal serial bus Acronyms and abbreviations 95...

  • Page 96: Documentation Feedback

    Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (mailto:docsfeedback@hp.com). Include the document title and part number, version number, or the URL when submitting your feedback.

  • Page 97: Index

    16, 72 hot-plug power supply calculations 92 components, identification 16, 72 HP Insight Diagnostics 69 connectors 72 HP Insight Diagnostics survey functionality 69 CSR (customer self repair) 6 customer self repair (CSR) 6 identifying components 72 illustrated parts catalog 16...
  • Page 98 system components 19, 72 system maintenance switch 77 NMI header 77 TPM (Trusted Platform Module) 67 optical drive 36, 86 TPM connector 76 troubleshooting 68 troubleshooting resources 68 Trusted Platform Module (TPM) 67 part numbers 16 PCI riser board expansion slot definitions 75 PCI riser cage 46 PCIe riser board 48 USB (universal serial bus) 70...

Table of Contents