Hunter HVLS Installation Manual page 5

!
BEFORE YOU BEGIN
To prevent serious injury or death, ALWAYS attach the Retention Cable to the fan motor and secure to the building structure on
EVERY fan.
The Retention Cable, if installed per Hunter Industrial specifications, can limit the distance the fan could fall in the unlikely event of
mounting system failure. Failure to install and to secure the retention cable will void your warranty.
Mark the Floor to Alert Personnel
When mounting a fan in an area where materials could be elevated and contact the rotating fan blades, be sure
to mark or rope off the area of install.
Weight and Torque Considerations
Always mount fan directly to building structure that can withstand approximately double (2x) the maximum hanging weight of the
fan.
The maximum fan hanging weight and torque is as follows:
MAXIMUM HANGING WEIGHT
24' Titan
212 lbs.
24' ECO
150 lbs.
14' XP
135 lbs.
If there is any uncertainty about the potential for the building structure to withstand double the maximum hanging weight of the
fan, a professional structural engineer should perform a thorough evaluation of the building prior to purchasing the fans. Hunter
Industrial provides guidelines for mounting fans; however, it is the sole responsibility of the building owner and installer to ensure
the safety of the mounting system and retention cable, the building structure is sound, and the installation complies with all federal,
state, and local codes.
Always use Personal Protective Equipment
You should always wear Personal Protective Equipment, such as a Hard Hat, Safety Glasses, and a Fall Harness when installing
industrial fans.
Damaged Equipment
Never operate or install any fans or fan accessories that appear to be damaged. Failure to follow this instruction can result in death,
serious injury or equipment damage.
To reduce the risk of personal injury, do not bend the blades or blade holders when installing or cleaning the fan.
Do not insert foreign objects in between rotating fan blades.
Service
If the fan does not operate properly using the procedures in this manual, remove all power to the unit and contact our Technical
Department for further assistance at 1-844-593-FANS (3267).
SAFETY & PRECAUTIONS
CRUSH HAZARD
TORQUE
75 ft lbs.
75 ft lbs.
75 ft lbs.
5