Installation; Step 1: Mounting - Hunter HVLS Installation Manual

INSTALLATION

ADJUSTABLE DOWNROD MOUNT OVERVIEW
A B
Secure bracket and Assemble shims and clamps on one side of
downrod to lift and raise to the bracket per the figure below.
an I-Beam that is part of the
Hook the clamp on one side of the I-beam
building structure.
and tighten hardware until the clamp and
shim are snug but can still be moved.
B
C
WARNING: SUPPORT DIRECTLY FROM BUILDING STRUCTURE

STEP 1: MOUNTING

CRUSH HAZARD. To prevent SERIOUS INJURY or DEATH, ALWAYS mount fan directly
from building structure that can withstand double the installed fan weight.
C
Assemble the opposing
shim and clamp on to the
I-beam and Tighten using a
3/4" socket and wrench.
3/4"
Socket &
wrench
D
D
Center the mount under
the I-beam. Check that
clamps have maximum
engagement on both sides
and tighten hardware.
13