Table of Contents
Advertisement
PROGRAMMING THE ADJUSTABLE FREQUENCY DRIVE
Intelli-Connect Mobile
Intelli-Connect Mobile comprises a wireless operator module (WOP-20) mounted on the control panel that is connected to a single Magnetek
adjustable frequency drive on a hoist or single crane motion via a CAT5 Ethernet cable. The wireless operator creates a wireless network,
which is accessible from a personal electronic device (PED), such as a smartphone or tablet. Set your own SSID (service set identifier) and
password to establish a protected link for data flow. Once linked, Intelli-Connect Mobile enables quick and easy programming, maintenance,
monitoring, and troubleshooting of adjustable frequency drives associated with your hoist or crane motion via your PED. The mobile app is
available as a free download on Google Play or the Apple
App Store
*.
®
®
Using the Keypad
All functions of the drive are accessed using the keypad. The information needed to configure the drive's application is entered into
the drive by using the functional LEDs. This information is stored into the drive's memory.
Keypad Functions
The keypad has a 5-digit LED display. Both numeric and alpha-numeric data can appear on the display.
Indicators and keys on the keypad are described below.
NOTE: The STOP key is always active and will cause any run command to come to an immediate stop.
*Google Play is a trademark of Google LLC. Apple and App Store are registered trademarks of Apple Inc., registered in the U.S. and other countries.
20
P/N: 192047082 (REV AD) 627NH March 2022
VARIABLE SPEED ELECTRIC CHAIN HOIST WITH
OPTION
Advertisement
Table of Contents
