Main Functions; Eperf Connect Configuration On Eperf Mobile - BodyCAP e Celsius Performance Connect User Manual

Telemetric system for continuous core temperature monitoring

Hide thumbs Also See for e Celsius Performance Connect:

Table of Contents

P063GUI001 - User guide eCelsius Performance Connect.1 - EN

2- Association of an available ePerf Connect: You may then select an existing ePerf Connect device or

pair a new device to the ePerf Mobile application. To pair a new device, you have to make a long press on

the up button (bouton 2) until the message ''Associat. BLE'' appears on the screen of the ePerf Connect

device.

On ePerf Mobile, a green reference ''ePerf Connect XX.XX'' should appear that indicates the ePerf

Connect device is available for a BLE association. Once selected, please validate the peering by entering

in ePerf Mobile Application the code displayed on the screen of the ePerf Connect device. The ePerf

Connect device will appear in the list of available paired devices. In case of error, please try again the

whole process.

Note: the BLE name of the ePerf Connect corresponds to the serial number at the back of the device

(SN: XXX).

Before use of ePerf Connect, it is necessary to configure few parameters.

To do so, please go to the ePerf Connect setting options thanks to the ''Nut'' symbol on the main screen

below the profile concerned.

The parameters available are:

• The date and time (automatic)

The date and time of the Android support (Smartphone or tablet) on which the

ePerf Mobile Application is installed will be sent to the ePerf Connect device.

This information will allow data timestamp for the coming recording session and

is also displayed on the screen of the ePerf Connect device.

Figure 6: BLE peering ePerf Connect with ePerf Mobile

MAIN FUNCTIONS

Table of Contents

Do you have a question about the e Celsius Performance Connect and is the answer not in the manual?