BodyCAP eTact Quick Start Manual

Dear customers, thank you for purchasing the eTact system. This quick start guide is designed to
introduce you to the basic functions of the system. Hereby you will find some recommendations
related to its first use.
This document does not replace the user manual. For an optimal use of the device, we
recommend that you take note of all instructions in the user manual stored on the USB stick.
Your eTact system is made of 4 components:
- The Patch eTact
- A cable designed to data communication with PC or Mac and battery charging
- A PC / Mac software « eTact Watcher », used to configure and download data from the patch. The
software is stored on the USB memory stick delivered with the system.
- A PC / Mac software « eTact Analysis », used to process and analyze data from the patch. The
software is stored on the USB memory stick delivered with the system.
Picture 1 : Description of eTact and its wire connection with the dedicated cable delivered
with the system.
WARNING, eTact is very sensitive to Sweat and Humidity. Ensure that the system is not
exposed to water projections and humidity. You should use the bandages that were sent
with the system to protect the system.
If you have any questions and you did not find the answers in the user manual, please request
assistance from BodyCap:
BODYCAP
3 rue du Docteur Laennec
14200 Hérouville St Clair
FRANCE
Quick Start Guide
eTact
Activity monitoring device and Temperature indication
+33. (0)2.61.53.08.14
support@bodycap-medical.com
www.bodycap-medical.com
P090GUI002.4 EN
®
1