System Introduction; Ecelsius Performance Capsule; The Activator; The Button - BodyCAP e Celsius Performance Connect User Manual

P063GUI001 - User guide eCelsius Performance Connect.1 - EN

3. SYSTEM INTRODUCTION

The capsule eCelsius Performance (Fig. 1) is intented to be swallowed, with a glass of water. It has to be
woken up by the activator and associated to the ePerf Connect device to monitor core temperature.
The signaletic bracelet (Fig. 2) is worn to the wrist before the ingestion of the first capsule and is removed
only after expulsion of the last one. A signaletic bracelet is provided with each capsule delivered. These
bracelets are in the same package than the capsules. They allow to inform the caregivers that the subject
swallowed a capsule and thus that it is forbiddden to perform an MRI exam.
In case of successive ingestion, the bracelet has to be removed after the expulsion of the last
capsule.
The activator is intented to activate the eCelsius Performance capsule before a recording session.
Button OK
Green LED
The button ''OK'' is used to launch the activation process.
The activation process is detailed in

eCelsius Performance capsule

Figure 1: eCelsius Performance capsule
Figure 2: Signaletic bracelet

THE ACTIVATOR

Figure 3: Description of the activator

THE BUTTON

ePerf Connect > Main functions > Activate a pill - page 17.
WARNING: Modification of the device forbidden
10
Hole to place the
capsule
Micro-USB
connector