Comfort Settings - Golden BUZZ ABOUT GP164 Owner's Manual

You may be spending a great deal of time on your BUZZ
maximum seating comfort, Golden Technologies, Inc. has designed this power chair to
incorporate the following adjustments for operator comfort.

COMFORT SETTINGS

1. Seat Height
4. Footrest Angle
Tools Required:
The following tools will allow you to make all comfort adjustments to your power chair.
 Socket/Wrench - 13mm
 Allen Wrenches – 6mm and 4mm
before making any adjustments, to eliminate the risk of the joystick being
accidentally bumped and activating the power chair.
Seat Height Adjustment
The seat is a center post design that is easily adjusted for height. See figure 8.
To adjust the height to a comfortable level:
1. Remove the seat.
2. Remove the battery pack.
3. Place a 13mm wrench on the lock nut, and insert an 6mm Allen wrench into the bolt.
4. Loosen and remove the bolt and lock nut, noting their placement.
5. Set the seat post to one of the two adjustment positions.
6. Reinsert the bolt and lock nut in the same order you remove them and tighten
securely.
VI. COMFORT SETTINGS
2. Arm Width
5. Joystick Bracket Length
Make certain that the power to your BUZZ
Bolt
TM
Lock Nut
Figure 8
17
ABOUT. To provide you with the
3. Armrest Angle
6. Joystick Position
ABOUT is turned off
TM