Golden BUZZ ABOUT GP164 Owner's Manual page 18

Arm Width Adjustment
1. Loosen one of the adjustment screws at the rear of the seat. See figure 9.
2. Slide the arm in or out to the desired width.
3. Tighten the adjustment screw to secure the arm.
4. Repeat steps 1-3 to adjust the opposite arm.
Note: The backrest can be folded down to minimize chair height during transport.
Armrest Angle Adjustment
1. Lift armrest up. See figure 10.
WARNING! WATCH FINGER PLACEMENT! BE CAREFUL NOT TO PINCH YOUR
FINGERS!
2. Turn the adjustment bolt to raise or lower the armrest-angle. Turning the bolt
clockwise will lower the angle. Turning the bolt counter-clockwise will raise the angle.
Turn until desired angle is reached.
3. Repeat steps 1-3 to adjust the opposite armrest.
VI. COMFORT SETTINGS
Arm Width
Adjustment Screws
Figure 9
Adjustment Bolt
(6mm Allen)
Figure 10
18