Comfort Settings - Golden LiteRider ENVY Owner's Manual

You may be spending a great deal of time on your LiteRider Envy. To provide you with the
maximum seating comfort, Golden Technologies, Inc. has designed this power chair to
incorporate the following adjustments for operator comfort.

COMFORT SETTINGS

1. Seat Height
2. Arm Width
3. Armrest Angle
4. Footrest Angle
before making any adjustments, to eliminate the risk of the joystick being
accidentally bumped and activating the power chair.
Seat Height Adjustment
The seat is a center post design that is easily adjusted for height. See figure 7.
To adjust the height to a comfortable level:
1. Remove the seat.
2. Place a 17mm wrench on the lock nut, and insert an 8mm Allen wrench into the bolt.
3. Loosen and remove the bolt, washer and lock nut, noting their placement.
4. Set the seat post to one of the two adjustment positions.
The seat post must be positioned with the stop on the same side as it was
set prior to removal.
5. Reinsert the bolt, washer and lock nut in the same order you remove them and
tighten securely.
VI. COMFORT SETTINGS
5. Footrest Height
6. Joystick Bracket Length
7. Joystick Position
Make certain that the power to your LiteRider Envy is turned off
Washer
Lock Nut
Figure 7
18
Stop
Bolt