Comfort Settings - Golden Alante GP205 Owner's Manual

You may be spending a great deal of time on your Alanté. To provide you with the
maximum seating comfort, Golden Technologies, Inc. has designed this power chair to
incorporate the following adjustments for operator comfort.

COMFORT SETTINGS

1. Seat Height
2. Headrest Height
3. Backrest Angle
4. Arm Height
making any adjustments, to eliminate the risk of the joystick being accidentally
bumped and activating the power chair.
Seat Height Adjustment
The seat is a center post design that is easily adjusted for height.
To adjust the height to a comfortable level:
1. Remove the seat. See figure 15.
2. Place a 17mm wrench on the lock nut, and insert an 8mm Allen wrench into the bolt.
3. Loosen and remove the bolt, two washers and lock nut, noting their placement.
4. Set the seat post to one of the three adjustment positions.
5. Reinsert the bolt, two washers and lock nut in the same order you remove them and
tighten securely.
on the left hand side of the power chair to ensure proper seat rotation.
VI. COMFORT SETTINGS
5. Arm Width
6. Armrest Angle
7. Footrest Angle
8. Footrest Height
Make certain that the power to your Alanté is turned off before
Bolt
When reinstalling the seat post, the seat stop must be positioned
9. Joystick Bracket Length
10. Joystick Position
Seat Stop
Lock Nut
Washer
Figure 15
19