Golden BUZZ ABOUT GP164 Owner's Manual page 13

IV. ASSEMBLY
Seat Installation
1. Fold the seat back down
.
2. Grasp the seat firmly on each side, lift the seat and align the seat pin with the hole in
the seat post receiver. See figure 4.
Refer to the "Technical Specifications" section in this manual
for the seat weight. Removal of arms will reduce the weight of the seat. Please ask
for help if you do not feel capable of safely lifting that much weight.
Figure 4
3. Insert the seat into the seat post.
4. Push down on the seat to lock into place. Move the seat from side to side to make sure
it is locked into place.
To rotate your seat, pull up on the seat rotation lever and rotate the seat
to the desired position. Release the handle to lock the seat in position.
Be sure the seat is correctly installed and locked before
operating your power chair.
Never pull on the arms or use them as a handle to move the
power chair as they could inadvertently pull out of the receiver bar causing injury.
13