Golden BUZZ ABOUT GP164 Owner's Manual page 20

Joystick
Bracket Bolts (2)
(4mm Allen)
Joystick Position
1. Loosen the joystick adjustment screw. See figure 13.
2. Slide the joystick mount forward and remove the joystick.
3. Reposition the joystick and joystick cable to the opposite side of the power chair.
4. Flip up the armrest.
5. Use an 4mm Allen wrench to remove the two bolts connecting the joystick bracket to
the armrest. See figure 13.
6. Remove the two bolts in the opposite armrest. See figure 13.
7. Place the joystick bracket on the opposite armrest; align the two bolts with the two
holes in the armrest, and tighten to secure the bracket to the armrest.
8. Insert the joystick mount into the joystick bracket and adjust to a comfortable
position.
9. Tighten the joystick adjustment screw to secure the joystick.
10. Reinsert the two bolts removed in step 6 and tighten for future use.
If you do not feel capable of safely making these adjustments, please
contact your local Golden representative.
VI. COMFORT SETTINGS
Joystick
Adjustment
Screw
Figure 13
20
Opposite Arm (2)
(4mm Allen)