Maximum Speed/Profile Indicator Flashes
This indicates the speed of the wheelchair is being limited for safety reasons. Contact your
Golden Technologies representative
The LiNX modules are not user serviceable. Do not attempt to repair LiNX
modules.
FREEWHEEL MODE
♦ To disengage the brakes and put your power chair in freewheel mode, push the
freewheel levers down. See figure 15.
♦ To re-engage the brakes and take your chair out of freewheel mode, pull the
freewheel levers up. See figure 15.
slope or incline of any type.
operating your power chair.
VII. OPERATION
Drive
Never put your power chair in freewheel mode when it is on a
Never put your power chair in freewheel mode while you are
Freewheel
Figure 15
26