Maintenance; Disposal; Declaration Of Conformity - PEDROLLO E1 MONO Original Instructions For Use

At power-up, the control panel
enters the PHASE MISS alarm state
At power-up, the control panel
enters the PHASE ERROR alarm
state
The display does not turn on.

MAINTENANCE

The E control panel does not require any routine maintenance when used within its operating limits and in accordance with
the instructions in this manual.
Only authorised service centres may carry out reactive maintenance or repairs.
Use only original spare parts for repairs. The manufacturer shall not be held liable for harm to people or animals or damage
to property due to maintenance carried out by unauthorised personnel or using non-original materials.

DISPOSAL

Follow the regulations and laws in force in the country where the unit is used when disposing of the parts that make up the
E control panel. Do not dispose of polluting parts in the environment.
Proper disposal of WEEE (DIRECTIVE 2012/19/UE)

DECLARATION OF CONFORMITY

We hereby declare, under our sole responsibility, that the product concerned conforms to the provisions of the following
Community Directives, as amended, and with the transposing national legislation.
European Directive 2014/35 EU
Electromagnetic Compatibility Directive 2014/30 EU as amended, and with the following technical standards:
EN 61439-1, EN 55014-1, EN 61000-3-2, EN 61000-3-3
San Bonifacio, 01/03/2021
• For the E TRI (three-phase) control panel only
Check that the phases are connected correctly and that the power cables are
not damaged.
• For the E TRI (three-phase) control panel only
Check that the phases are connected correctly and that the power cables are
not damaged.
• Check that the FLAT cable is connected correctly.
• Check that the FLAT cable is not damaged.
Pedrollo S.p.A.
The President
Silvano Pedrollo
ENGLISH |
67