Preparing And Installing The Distribution Plate - ekwb EK-Quantum Reflection2 PC-O11D EVO D5 PWM D-RGB User Manual
Distribution plate
Hide thumbs
Also See for EK-Quantum Reflection2 PC-O11D EVO D5 PWM D-RGB:
- User manual (16 pages) ,
- User manual (17 pages) ,
- User manual (15 pages)
Table of Contents
Advertisement
PREPARING AND INSTALLING THE DISTRIBUTION PLATE
STEP 1
Carefully place the distribution plate into the case and align the
mounting holes. Be careful not to scratch the acrylic!
STEP 1
STEP 2
Secure the distribution plate using the included M3 x 8 and M4 x 8
DIN7991 screws through the front frame of the case. The screws
shouldn't be over-tightened to avoid cracking the plexi. The screw
heads should sink in as not to interfere with the mounted front panel.
M3 x 8 DIN7991
For this step you will need:
SCREW
M4 x 8 DIN7991
SCREW
STEP 2
- 8 -
Allen Key 2 mm
Allen Key 2.5 mm
Advertisement
Table of Contents
Need help?
Do you have a question about the EK-Quantum Reflection2 PC-O11D EVO D5 PWM D-RGB and is the answer not in the manual?
Questions and answers