Adjusting The Convergence Manually - Sony WEGA KP-FX432 Operating Instructions Manual

Changing the "Setup" setting (continued)

Adjusting the convergence manually

1
After selecting
"Convergence", move
up or down to select
"Manual Adjust", then
press .
The cross pattern appears
on the screen.
2
Move up, down, left
or right to adjust the red
lines until they converge
with the green lines, then
press .
3
Move up, down, left
or right to adjust the blue
lines until they converge
with the center cross
pattern, then press
To return to the normal screen
48
Adjusting Your Setup (MENU)
.
Press MENU.
Tip
• Selecting "Digital Quick Focus" under "Convergence" allows you to
adjust the convergence automatically. When the Digital Quick Focus
feature is performed, manual adjustment values are erased.
Notes
• Adjust convergence about 20 – 30 minutes after the projection TV is first
turned on.
• You cannot use the 2 +/– buttons on the projection TV for manual
convergence adjustment.
Adjust : Mm < , Next Color :
Adjust : Mm < , Finish :