Sony WEGA KP-FX432 Operating Instructions Manual page 10

Getting Started (continued)
4
Make sure that "Yes" is selected, then press
The convergence adjustment screen
appears, and the convergence is
automatically adjusted.
The last "Initial Setup" menu
appears.
5
Move up or down to select "No", then press
The "Initial Setup" menu will not appear again the next time you turn on the
projection TV by pressing !.
To allow this menu to appear again, select "Yes", then press
10
Using Your New Projection TV
Tip
If your projection TV has preset an unwanted channel or cannot preset a
particular channel, then preset your projection TV manually (see page 49).
Notes
• If you want to cancel any setup, move
press , or press MENU.
• Convergence is also adjusted manually using the menu (see page 48).
• You can also perform the Digital Quick Focus feature using
front panel.
• Sound will mute while the Digital Quick Focus feature is running.
• The MENU, 2 + or – and
also used for the above operations instead of
the remote control.
.
D i s p l a y t h i s m e n u n e x t t i m e ?
S e l e c t :
.
up or down to select "No" and
(Enter) buttons on the projection TV can be
and MENU buttons on
I n i t i a l S e t u p
Y e s
N o
C o n f i r m : E n d :
.
on the