Connecting Optional Components - Sony WEGA KP-FX432 Operating Instructions Manual

Connecting optional components

You can connect optional audio/video components, such as a VCR,
a DTV (Digital Television) receiver, multi disc player, camcorder,
video game, or stereo system. To watch and oprate the connected
equipment, see pages 17 and 31.
Connecting a camcorder/video game equipment
using t 4 (video input 4) jacks
To open the drop-
down panel of your
projection TV, push
it up until you hear
a click, then it will
slide down.
Video game
equipment
To S video
output
or
Camcorder
To video and
audio outputs
Notes
• When connecting video game equipment, display the "Setup" menu and
select "On" for "Game Mode" to adjust the picture setting that is suitable
for video games (see page 46).
• You can also connect video equipment to the t 1, 2, or 3 (video input)
jacks at the rear of your projection TV.
• When you connect video equipment to the S video input, display the
"Setup" menu and select "Auto" for "S Input" (see page 47). If the signals
are input to both
signal is automatically selected. To view the video signal input to
(video input), select "Off" for "S Input".
S video cable (not supplied)
Audio/Video cable (not supplied)
(S video input) and
Front of projection TV
4
L(MONO) R
To
(S video input)
To t 4 (video input)
(yellow)
-L (MONO) (white)
-R (red)
(video input), the S video
Using Your New Projection TV
4
L(MONO) R
: Signal flow
continued
11